To some extent, Taylor Motor Company was ruined by Edicott, who pushed it into the abyss. Of course, Taylor Motor Company was also responsible for not knowing the right person.
The previous incident had passed, and Edicott had received the punishment he deserved. Now, what Chen Mo had to do was to pull the company that had fallen into the abyss and lead it to the top!
After understanding the situation of this model in detail, Chen Mo had a general idea in his mind. However, he had to look at the design drawings and prototype of the car before he could make a concrete decision.
…
Taylor Motor Company, which was now Shendun Motor Company, R&D Department Office.
Chen Mo sat in front of the computer and quickly looked at the design drawings of the failed bulletproof off-road vehicle.
Chen Mo, whose reaction speed and memory were far superior to ordinary people, quickly finished reading all the drawings of the car, including the complete set of drawings of the new engine that had just been obtained from the engine research and development team.
Combined with the inspection of the only prototype car before, Chen Mo already had a clear understanding of the situation of the entire car.
According to Chen Mo's understanding, if the engine problem was not considered, the overall performance of the car they designed should be at the intermediate level in the current field of bulletproof cars. This was very rare for the R&D and Design Department, who completely designed a bulletproof armored car independently for the first time.
This was different from the bulletproof cars they modified before.
The modification only required local modifications on the basis of the original car. It did not involve the redesign of the entire car, so the difficulty was much lower. This was also the reason why there were many modification factories that modified bulletproof cars, but not many car manufacturing companies that could independently produce bulletproof cars.
After thoroughly understanding the design drawings and various data of this failed model, Chen Mo had a clear idea in his mind. At the same time, his previous idea became clearer.
After thinking for a while, Chen Mo made a decision in his mind. He immediately stretched out his hands and quickly typed on the keyboard. One by one, instructions were quickly issued.
Soon, the general manager of the company, Michael, who had just returned to his office from the conference room, received Chen Mo's instructions and a long purchase list. Together with the order, a huge sum of up to 500 million US dollars was injected into the company's account.
The originally stagnant and lethargic company was revitalized again. The various departments quickly acted according to Chen Mo's orders.
A large number of purchase orders for equipment and materials were issued from the purchasing department. A large amount of money was spent. A variety of production and processing equipment of various sizes, high-precision instruments, and various materials were quickly shipped over in batches.
What made the purchasing staff feel strange was that among the purchased equipment, there were vacuum arc smelting furnaces, steel plate hot rolling mills, large-tonnage hydraulic presses and other forging and casting equipment that were usually only used in the production of special alloys.
Moreover, there were a large number of rare metals, materials such as iron, magnesium, aluminum, calcium, manganese, as well as rare metals such as barium, titanium, tungsten, rhenium, Molybdenum, Molybdenum, Chromium, Vanadium, and other rare metals.
In addition to purchasing large quantities of equipment and raw materials, the production department also made huge adjustments under Chen Mo's orders.
After the production of the original models was stopped, the factory and production lines had to be rebuilt and adjusted.
Although there were sufficient funds, Chen Mo was not in a hurry to replace the production line with a higher degree of automation and more advanced automotive automation.
Not to mention that it would take a long time to order the automation equipment, it would take even longer to put it into production. In the short term, the company's original semi-manual production model was enough to cope with the initial production needs.
Of course, this production line would definitely be replaced with an automated production line in the future. It was just that there was no need to purchase it from outside. Chen Mo had a full set of advanced automated production line drawings in his hands. He could totally build it himself. Of course, this was a matter for the future.
Taylor Motor Company originally had four models for sale. These four models shared the same production line and occupied a large factory as the automotive production workshop.
Apart from that, Taylor Motor Company also had two large factories. One was a modification workshop that specialized in the modification of special vehicles. The other was a chassis production and parts processing center that was responsible for the production and processing of automotive parts and the manufacturing of their own chassis.
These three large factories and a three-story office building were all of Taylor Motor Company's assets.
Now that the production of all models had been shut down by Chen Mo, under Chen Mo's orders, the workers and engineers quickly moved to adjust and rearrange the factory's equipment.
The modification workshop and production workshop were merged. The overly old equipment was eliminated and replaced with new equipment. It was quickly integrated into a larger production line for bulletproof off-road vehicles. Most of the existing workers were also arranged to work on this production line. Once it was fully operational, the production capacity would far exceed the past.
In fact, Taylor Motor Company could only sell around 2,000 vehicles a year in the past. The production capacity of the original production line was not fully utilized at all. If the sales could keep up, as long as the number of workers increased, the annual production capacity could reach 10,000 vehicles.
After integrating the modification workshop, replacing and upgrading a large number of equipment, it would not be a problem to produce 15,000 vehicles a year. However, with the current number of workers, it was impossible to achieve this production capacity. Still, it would not be a problem to produce 3,000 vehicles a year. In other words, they could produce 10 vehicles a day.
The modification workshop and production workshop were merged. The vacant modification workshop was filled with a large number of newly purchased equipment, such as vacuum arc smelting furnaces, rolling mills, hydraulic presses, die-casting molds, die-casting machines, and so on. A large number of equipment were neatly arranged in a certain pattern in the huge workshop.
While the company was busy integrating the workshop and purchasing equipment and supplies, Chen Mo was not idle. After the adjustment of the production line, it could be put into production. The development of the original bulletproof off-road vehicle was not successful, so it could not be produced directly.
Therefore, after Chen Mo issued the order to adjust the workshop and purchase equipment and supplies that day, he immediately devoted himself to modifying the design drawings of the new model.
Chen Mo's first modification target was the engine!
This new engine, which had taken many years to be released under the efforts of the engine team members and the suppression of the team leader, Edicott, was far from being at its strongest state.
Under Edicott's intentional control, the development of the engine had been carried out separately. Several research and development team members were only responsible for their own parts. Although the development was successful, Edicott had been hiding it. It was not until the pressure of Young Taylor that he had no choice but to integrate the new engine and produce it.
However, before this, the engine had not been tested and adjusted and improved. The potential of the engine had not been fully developed. It was simply an incomplete version.
If the engine research and development team were to follow the normal procedures of testing, adjusting, verifying, and modifying the engine, it would take at least a few months to adjust the engine to its strongest performance.
However, Chen Mo was different. Not to mention that he had mastered advanced science and technology that was more than 20 years ahead of the current world, which naturally included the top super car engine. Chen Mo's incomparably developed brain, super memory, analysis, and calculation ability that surpassed that of a peerless genius, allowed him to quickly find the defects and shortcomings of this incomplete version of the engine in a very short period of time. Then, he made improvements and fully stimulated the engine's performance to its best state.
After completing the design modification of the engine, Chen Mo handed the complete version of the drawings to the research and development department and asked them to start the independent manufacturing of the engine.
With the engine drawings and the corresponding production equipment, the manufacturing of the engine was not difficult. The engine research and development team itself had the ability to manufacture a single engine. Now, it was just putting it into mass production.
In the United States, where the automobile industry is developed, high-end technology is really rare. With the drawings, it is not difficult to put it into mass production. The relevant production equipment can be easily bought.
When Chen Mo first listed the purchase list, he had already added the engine production equipment to it. Therefore, with sufficient financial support, a full set of engine production equipment was quickly delivered and installed. The first complete version of the engine was quickly manufactured and installed on the prototype that had been strong on the outside but weak on the inside.
The result was obvious. Under the improvement of Chen Mo, a super genius scientist who was able to develop the Iron Man Armor with Tony Stark, the performance of this new engine has been greatly improved compared to before.
This improved V6 twin-turbocharged engine with a displacement of 4.0t had a maximum power of 650 horsepower/6600 rpm and a peak torque of 750 nm/4500 rpm. Not to mention driving this 3.5-ton bulletproof off-road vehicle, even if it was twice as heavy, there would be no problem!
With such a strong heart, the bulletproof off-road vehicle, which had been "weak" before, seemed to have a new lease of life.
Its powerful driving force allowed it to perform amazingly in terms of acceleration, hill climbing, cross-country, and top speed.
If it weren't for the slightly bloated and heavy body, no one would believe that this powerful off-road vehicle that accelerates rapidly and climbs steep slopes like flat ground would actually be a 3.5-ton bulletproof off-road vehicle. This completely subverts the bulletproof image that the bulletproof car has always been a bulletproof off-road vehicle.
Looking at the flexible and swift heavy figure running freely in the test field, all the people present were full of confidence in the future of the company.
After so many years in the automotive industry, their understanding of cars is definitely beyond that of most people. They can be sure that no bulletproof car in the current market can reach such a level.
It's not that there are no cars with stronger engine horsepower and torque than theirs, but they are all larger in size, with a body length of nearly six meters or even more than six meters. It can even be said that they are civilian bulletproof armored vehicles.
These super-large bulletproof vehicles have huge bodies and heavy armor. They look similar to military armored vehicles. They are very ostentatious, for fear that others will not know that they are driving bulletproof vehicles.
These clumsy and huge guys were all equipped with V8 or even V10 engines. While the horsepower was high, the huge body and thick armor also brought more weight. Therefore, although the horsepower was higher than their V6 engines, the load they needed to bear was greater. Instead, they were more clumsy than ordinary bulletproof cars.
Among the bulletproof vehicles of similar size and weight, no one can surpass this bulletproof off-road vehicle with the new engine that Chen Mo has personally improved in terms of power.
When the bulletproof performance is similar, naturally, the more power, the better. After all, people who buy bulletproof vehicles want to ensure their own safety in the face of danger. A strong power can allow them to evacuate the scene in the shortest time and get out of danger. Naturally, the choice of the customer is obvious at a glance.
Moreover, such a strong power also brings more possibilities to this car. Under the condition that the power is guaranteed, they can completely upgrade the bulletproof level and produce different bulletproof vehicles according to the needs of different customers.
Judging from the performance of this prototype car, even if the modification is the highest level, VR10, it will not affect the performance much at all.
Not to mention that the company's personnel are full of confidence and ambition after seeing the performance of the prototype car with the complete version of the engine, Chen Mo is not satisfied with just this.
After solving the problem of the engine, Chen Mo turned to modify the design of the bulletproof off-road vehicle.
However, he did not make too many changes. The entire car is a whole, and a slight change in one part may affect the whole. The modification of one part is likely to require corresponding changes in many other parts. The more changes there are, the more changes there will be. The project will be very large, and it can even be said that it is not much different from a new design from scratch.
Chen Mo can't complete all the design, from the layout to the components, by himself. This will take a lot of his time, and it will only take more time if he hands it over to the R&D and design departments.
Therefore, Chen Mo did not make too many changes. He only optimized and improved some minor details, which improved the car's control, stability, flexibility, and other aspects.
The only major change Chen Mo made was the suspension system.
Not long ago in the world of Iron Man, Chen Mo, together with Tony Stark and the others, developed the powerful Batmobile. Needless to say, the various functions of this car are powerful, but many of them are not suitable for ordinary cars.
However, Chen Mo still weakened one of the functions and added it to this bulletproof off-road vehicle, and that is the chassis height adjustment system.
Of course, unlike the complex transformation of the Batmobile, which directly changed from a sports car to an off-road vehicle, Chen Mo's improvement of this bulletproof off-road vehicle is much simpler. He only made some changes to the suspension system. Without changing the other parts of the chassis, the height of the chassis can be changed through the suspension system to deal with any kind of complicated road conditions. Real girl online service, help you find books, chat with you, please WeChat
Popular web novel
Or rd444
You've already exceeded your reading limit for today. If you want to read more, please log in.
Login
Select text and click 'Report' to let us know about any bad translation.
