The main material of the Clay Golem was high-quality clay, which was plentiful near Northtown City. Building a Clay Golem required about a thousand pounds of clay. Making a Clay Golem was like making ceramics.
Although the Clay Golem wasn't a very powerful golem, there were always some exceptions. Once in the era of the Arcane Empire, there was an Arcanist who was proficient in making Clay Golems. He made a powerful Clay Golem that had self-healing ability and could use spells to attack.
This arcanist had invented a material called Memory Clay. After the clay was formed, it would remember its original appearance. After being attacked from a distance and the clay golem was broken, it would only take a few minutes for the clay golem to condense and return to its original appearance.
Unless the clay was completely destroyed, it would quickly recover. The Arcanist used Memory Clay to make a large number of Clay Golems. It was said that the Clay Golems' fighting strength was on the same level as the Steel Golems. Of course, the Memory Clay Golems were eventually annihilated in the long river of time.
Suhlen naturally didn't have any information about the Clay Golems. The Clay Golems he made were just ordinary Clay Golems. The Clay Golems made by the production line were transported to the warehouse for preservation. These Clay Golems didn't use soul crystals as their cores.
When using them, one only needed to put a soul crystal in them and cast a spell to activate them. Because they didn't use the tower spirit to activate them, after a certain number of Clay Golems were accumulated, several high-grade Wizards would take turns to cast spells to activate the Clay Golems.
In order to complete the golem production line as soon as possible, Hathaway and Suren had been busy during this period. The automatic mageweath inscription machine, which was the most important part of the golem production line, took two weeks, while the other parts, such as the energy channel and site construction, only took three days.
The Clay Golems on the production line were made by Suhlen, which took him a week. These Clay Golems were then modified by Hathaway and instilled with various knowledge.
After the clay golem assembly line started running, Suhlen and Hathaway began to make some adjustments to the golems to make the production line run more smoothly. At the same time, the conformity rate of the golem assembly line also increased. After a day of operation, the conformity rate of the various parts produced on the golem assembly line had reached 95%.
The entire Golem Factory operated like an assembly line. The head, torso, limbs, and various other parts were all made separately. All the parts were made according to the standard parts, and the deviation was less than 0.1 coefficient.
Suhlen specially made two clay golems for them to check whether the various parts met the requirements. The parts that did not meet the requirements would be directly picked out, and only the parts that met the requirements could enter the next stage.
These parts were assembled by the clay golem engineer. Suhlen upgraded its soul crystal to a high-level soul crystal. He would assemble and test the golems. Only the qualified golems would be placed in the warehouse after the assembly was completed.
After three days of normal operation, Suhlen made a detailed calculation of the clay golem assembly line. If the clay golem assembly line ran at full capacity, it could produce ten clay golems a day. According to this output, it could produce three hundred clay golems a month.
But in fact, the Northwind Tower didn't need so many clay golems right now. Suhlen planned to only produce a few hundred clay golems and send them to the Wizard Tower, the Secret Realm, the Underground World, and other places.
Suhlen had arranged for people to collect the materials for the Golem Workshop. Among them, the amount of high-quality clay was the largest, but this could be dug up by the slaves and then sent over after a period of time. As for things like magic essential oil and elemental dust, the amount used was not large. After one addition, they could be used for a long time.
Suhlen actually didn't care much about the clay golem assembly line. On the contrary, he cared more about the stone golem assembly line and the steel golem assembly line. The clay golem assembly line was at best an attempt to accumulate experience. Then, on the basis of the clay golem assembly line, he would build a better stone golem assembly line and steel golem assembly line.
In fact, the technology of the stone golem assembly line was not much different from that of the clay golem assembly line. This time, there was no need for crushing, mixing, and molding.
Ordinary stone golems only needed high-quality granite or high-quality marble, but obsidian golems needed obsidian as a material, and obsidian was harder than ordinary stone and more difficult to process.
Northern Battlefront City was rich in mineral resources, but there weren't many obsidian ores. Most of the obsidian ores discovered in the Underworld had been used to construct the Northwind Tower. Now, there wasn't enough obsidian in the Underworld.
Obsidian ores were mainly produced in volcanic areas. There were no volcanoes within a few hundred miles of the Northwind City. There were no volcanoes even in the Underground World, so there was not much obsidian ores produced here. Obsidian ores were the main material for making obsidian golems and gargoyles. It was indispensable. If Suhlen wanted to get a large amount of obsidian ores, he could only buy them from other countries.
However, this method had a lot of hidden dangers. Obsidian ores were strategic resources. Once the supply was cut off, the Northwind City would be at a loss, and the production of obsidian golems would no longer be able to continue. In his past life, Suhlen knew the power of a trade war. Back then, Mao Xiong was almost dead because of the trade war with the United States. His economy had always been poor, and Suhlen did not want anyone to have a hold on him.
Another reason was that obsidian ores were very expensive. Once the Northwind City built an obsidian golem production line, a lot of obsidian ores would be consumed. Every month, the Kinnar ores would be used to buy obsidian ores. Although Suhlen was rich, he still felt the pinch.
There were a few ways to get obsidian ores without obsidian ores. The simplest way was to find an empty space and use the power of spells to change the environment and lead the underground lava out. However, this method was very difficult. Even legendary wizards would have a hard time doing it.
The second method was to capture an adult Red Dragon. Creatures like Red Dragons had radiation around their bodies. If they lived in a place for a long time, they would slowly change the environment and landscape of the place. Finally, they would turn the area into magma. Under normal circumstances, Red Dragons liked to live in volcanic areas. However, capturing an adult Red Dragon was less difficult than the previous method.
The third way was to go to the fire elemental plane and capture magma elementals that could make lava. Magma elementals also had the ability to change the environment. They could turn the ground into lava. This method was the technology used to build an obsidian factory. It was the technology that Suhlen and Hathaway secretly obtained in the Emerald Tower.
Obsidian ores were very important, and a lot of them were needed in the floating cities. The requirements for the construction of a floating city were very high. The entire city had to be built with obsidian ores, so most of the time, there would be an obsidian factory in every floating city.
These obsidian factories usually used magma elementals as the main force to produce obsidian ores.
You've already exceeded your reading limit for today. If you want to read more, please log in.
Login
Select text and click 'Report' to let us know about any bad translation.
