Hathaway put down the silver-white carving knife and stretched her body. Her voluptuous breasts outlined an amazing curve. More than half of the clay golem production line had been completed. Only the rune engraving equipment had not been completed yet.
This equipment required a tower genie construct made from a legendary soul crystal to operate, but it would be a waste if it was only used to produce clay golems, so Suhlen planned to input the stone golems' rune engraving technology into it as well.
When the time came, as long as the other equipment caught up, this equipment could be used to produce stone golems.
In addition to the legendary tower genie, this machine also required a lot of rare materials. Suhlen and Hathaway spent a lot of effort and finally made this equipment.
Finally, they just had to install the tower genie construct and it was done. Hathaway picked up her magic staff and quickly chanted an obscure spell. The surrounding elemental energy began to fluctuate violently. Soon, a dazzling light appeared, and a powerful elemental wave descended.
"Legendary Activated Life Construct!"
Strange elemental energy quickly gushed out from Hathaway's body, and a powerful mana instantly shrouded the legendary soul crystal in front of her. Soon, another wave of energy appeared in the room.
"Soul Weave! (Supreme Magic Skills + Mana Shaping + Soul Construct) "
Traces of soul power quickly changed under Hathaway's manipulation. Soul Weave was a very difficult spell, and it was a very crucial part of making a legendary tower genie. It was equivalent to building a personality for the tower genie, building a framework, and making the tower genie according to one's ideas.
Normally, the tower genies made by wizards were extremely calm and rational, but this did not stop some people from making a silly tower genie. Hathaway, who had experience in making the tower genie, was very fast this time. After about ten minutes, a rune was completed.
With a flash of light, the construction of the legendary tower genie was completed.
The next step was to install the Legendary tower spirit construct and the rune inscription device together. This was not a difficult task. After placing the Legendary tower spirit in the heart of the device, the automatic rune inscription device was considered complete.
[Automatic Rune Inscriber: Legendary Rune. Can inscribe runes on objects according to requirements. Accuracy + 25, Efficiency + 35, Indestructibility + 30, Logic + 32, Failure Reduction + 33]
After seeing the attributes of the Mageweath Inscriber, Suhlen nodded with satisfaction. With this thing, his Clay Golem production line would be completed.
Without any time to rest, Hathaway and Suhlen returned to the secret realm with the automatic mageweath inscription instrument. At this time, the Clay Golem production line in the secret realm was almost completed. After Hathaway installed the equipment, she directly connected it to the energy source.
Although he had a lot of information about his own work, he still needed to make adjustments. The light blue elemental energy entered the Golem Factory through the energy channel, and the entire Golem Factory began to slowly activate. A few Clay Golems, who were the workers, woke up from their standby mode and got ready to work.
"Tower spirit, Builder No. 1 activated!"
"System self-check in progress!"
"System self-check complete!"
"Beginning program loading!"
"Loading progress: 20%, 40%, 60%, 80%, 100%!"
"Loading complete!"
"Clay Golem Model 3 automatic production line in progress!"
"Connection complete!"
The Clay Golems, who had been quietly waiting for the notification, instantly began to move! Tower Spirit: Builder No. 1 was the name of the Tower Spirit of the Automatic Mageweath Inscription Machine. This Legendary Tower Spirit was also the brain of the entire Clay Golem production line. It was under its control that the automatic production line began to operate normally.
"Activate the Clay Golem production line!"
With Suhlen's order, the Clay Golem production line was instantly activated!
Several Clay Golems began to operate the machine, and cart after cart of clay was sent to the grinder to be crushed. The clay was only considered complete after it became very fine like flour. Next, the crushed clay was sent to the blender to be mixed. While mixing, magical essential oil, elemental powder, and other materials were added. Finally, the evenly mixed clay was sent to the press to be made into a standard Clay Golem Construct.
After a series of processes, these parts were sent to the rune inscription workshop, and the automatic rune inscription device would inscribe the runes. Hathaway and Suhlen looked at the processed Clay Golem part with a serious expression, and a bright ray lit up.
It was the Eye Devil's secondary eye that Hathaway had processed before that emitted this ray. It was still a little thick when it first appeared, but it immediately began to shrink. The measuring table next to it accurately measured the data of the instrument's beam.
If the data did not meet the requirements, the production would be rejected. The beam corrector next to it was used to correct this place. Next to the Eye Devil's secondary eye, there was an energy controller that controlled the power of the beam.
Under the control of Builder No. 1, the beam quickly reached the product's requirements. Then it began to inscribe the runes, and the prepared arcane powder and gem powder began to be thrown in. As the beam moved quickly on the part, an accurate rune appeared on that part.
After some debugging, the rune inscription device became faster and faster. In just three minutes, the rune inscription on a part was completed. Hathaway picked up the produced part and looked at it. This Clay Golem part was almost exactly the same as the one she designed. Although it was not as good as the one she made herself, it was still a good product.
This automatic rune inscription device could inscribe runes on six parts at a time. Of course, it could also let six beams work together to inscribe one part.
With the operation of the Golem production line, a Clay Golem was soon produced. After Suhlen walked around the Clay Golem, he found that it was no different from a normal Golem.
After seeing the successful production of a Golem, Hathaway and Suhlen were relieved. The Golem production line was finally completed.
"Builder No. 1!"
"I'm here, Master!" The Tower Genie's cold mechanical voice sounded.
"Suspend production! Let those Clay Golems come over and stand properly! "Hathaway pointed to the Clay Golems that were working.
"Yes, Master!"
Soon, several Clay Golems were neatly arranged in front of Hathaway.
Hathaway took out a silver-white carving knife. These Clay Golems were different from the ones that had just been produced. Some of the workmanship of the Golem production line had been added to them. However, during the operation just now, there were some small problems with these modified Clay Golems. Now, Hathaway needed to modify them.
The main work of the modification was on the palms.
Hathaway used the carving knife to give them more dexterous hands. At the same time, she engraved new runes on the finger joints and wrist joints, which could strengthen the flexibility of the Clay Golems' hands. Combat Golems did not need this kind of precise modification. Only this kind of auxiliary type needed it. The cost of this modification alone was enough to build an additional Clay Golem.
Although the auxiliary type Golem Golems were not good at fighting, their cost was usually much higher than the combat type Golem Golems!
The auxiliary type Golems needed to be instilled with more professional knowledge. Only with this knowledge could they carry out various work according to the situation on the spot. Their palms were very flexible. Only in this way could they carry out various work.
After completing the operation of the Clay Golem production line, the next step was to officially complete the installation of the production line. At the same time, the factory also needed to be built. Suhlen deliberately opened up a space of about 1,800 square meters, and then built a Clay Golem production line workshop according to the style of the factory in his previous life.
The creation of the Clay Golem could be divided into three parts. The first part was the construction of the limbs. This step could be done by disassembling them. This part was directly made through the mold press. It was not difficult, and even a wizard apprentice could do it. The second step was to carry out various treatments to make these clay parts set in shape and at the same time become difficult to damage. Only after this kind of magical treatment could the Clay Golems continue to be produced.
Otherwise, the Clay Golems could only be clay, and a piece could be knocked off with a casual swing of a stick. They could not fight or work at all. Only after this magical treatment, the clay would become as hard as rock.
The third step was the most critical magic pattern inscription. Only after the magic pattern inscription was completed could the Clay Golem perform various actions as if it had a life of its own. Of course, the premise was that it had energy.
The fourth step was to assemble the body structure. This step was like piecing together toy models to assemble the complete structure of the Golem Golem. The assembly workshop had the most Clay Golems. In fact, it was also a maintenance workshop. Damaged Clay Golems would be replaced here.
The benefits of the standardization of parts proposed by Suhlen were fully reflected here. If a part was damaged, it could be directly removed and replaced with a new one. As long as the damage was not too serious, or the Soul Core was destroyed, the maintenance problems of these Golems could be solved.
The last part was the casting and activation. This part was not automated for the time being. In fact, this step could be activated through the Tower Spirit. The activation spell could be inputted into the Tower Spirit, and the magic of the Elemental Pool could complete the activation of the Golem.
However, because the value of the Clay Golem was not high, Hathaway and Suhlen did not want to add another Tower Spirit. It should be known that the cost of such a Tower Spirit was about a million Kinnar. Moreover, Suhlen also wanted to build other Golem production lines, which would cost a lot of legendary soul crystals to make Tower Spirits. Naturally, he was not willing to invest too much in this production line.
In fact, activating the Clay Golem only required those high-grade Wizards to come over and cast a spell every once in a while.
You've already exceeded your reading limit for today. If you want to read more, please log in.
Login
Select text and click 'Report' to let us know about any bad translation.
