As he used the skill, Roy's body glowed with a light blue light.
This scene was very similar to when Roy used Bloodlust …
After the light blue light appeared, Roy waved his right hand gently and began to mobilize his immense magic power.
In an instant, the surrounding scenery immediately changed!
Roy and Ulthane were currently in a subway tunnel leading to the center of the underground bunker. The moment Roy released his magic power, the surrounding walls were immediately covered in black ice crystals. All the stones and cement that made up the entire tunnel emitted creaking sounds at the same time. It was caused by the shrinkage of these building materials under extremely low temperatures.
Affected by this shrinkage, some fine stones broke away from their original positions, fell from the top, and smashed on the steel rails on the ground.
In the end, with a cracking sound, the subway rail on the ground exploded. The material of the steel had become as fragile as glass. The moment it came into contact with the slightest pressure, it immediately burst open inch by inch.
At the same time, some colorless water droplets appeared in the air around them. These water droplets were extremely small, even smaller than the raindrops described as a drizzle!
Ulthane did not understand what was happening. The moment these colorless water droplets formed, he suddenly found it difficult to breathe.
With the formation of these colorless water droplets, a breeze appeared in the subway tunnel. But when this breeze blew, it caused more and more water droplets in the air.
These small water droplets, at first, were like fog in the air, but as more and more of them appeared, they began to gather and condense into larger water droplets. Finally, they became more like rainwater, and when they were heavy enough, they began to fall.
With a thud, Ulthane watched helplessly as a 'raindrop' hit his arm first.
In Ulthane's eyes, when this raindrop touched his skin, it boiled like boiling water. This boiling only lasted for a few milliseconds before turning into smoke again.
But during this process, something terrible happened. Ulthane found that the part of his skin that came into contact with the raindrop immediately lost feeling, and his skin instantly froze!
"Oh … oh no!" Ulthane wanted to speak, but he found that he could not open his mouth at all. He wanted to take a step, but he found that a tremendous sticky force came from the ground, firmly sticking his shoes to the ground.
Raindrops fell one after another. Those that landed on the ground instantly boiled and exploded into countless tiny mist beads. In the eyes of others, they were actually small clouds of mist, and those that landed on Ulthane turned into ice crystals and began to freeze his body!
Without even the ability to resist, Ulthane quickly turned into an ice sculpture!
This entire process probably took less than two to three seconds. In fact, Roy's magic power did not even come into contact with Ulthane. It only spread once, and it caused this phenomenon …
Only Roy himself knew what was going on.
The so-called 'Cryogenic Fate' was actually a new skill similar to Bloodlust that Roy had created. Apart from the light blue light enveloping his body, this skill did not have many special effects. This light blue was only used to distinguish the effects of Bloodlust. In short, this skill was actually a buff skill.
However, the attribute of this buff skill was to lower the temperature caused by Roy's frost magic power to below -200 ° C!
After Roy promoted to high-rank demon, he had taken some time to create a thermometer to test the temperature of his frost magic power. He found that even if he continuously increased his magic power output, his frost power would only hover around -150 ° C. Although this temperature was terrifyingly low and was a substantial improvement compared to the temperature of -100 ° C when he was a middle-rank demon, Roy still felt dissatisfied.
Where was the strength of frost? It wasn't those cool big moves, but something much, much, much, much lower!
Roy had previously considered where the limit of frost demons was. It was nothing more than absolute zero. It was the extreme temperature that froze everything and made all objects stop functioning!
However, the limit of absolute zero was extremely difficult to reach. Roy did not know how many souls he would need to consume to achieve this goal.
It was definitely impossible to achieve it in one go, so after thinking about it repeatedly, Roy decided to take a step-by-step approach to achieve it, so he created the buff skill Cryogenic Fate.
Cryogenic Fate: At the cost of consuming additional magic power, forcefully lower the temperature of frost power to -200 ° C. This state can continue until the magic power reaches zero.
Facts proved that Roy's idea was right. Creating this Cryogenic Fate skill did not consume too many souls. After spending 100,000 souls to create the Cold Winter Armor, he obtained more than 4,500 souls. In the end, he only spent 4,000 souls and five fallen souls and noble souls to obtain this Cryogenic Fate skill.
Of course, this was also because Roy's own frost power had a certain foundation, so the consumption was relatively small. If his magic power could originally create a low temperature of -10 ° C, then if he wanted to forcefully lower it to -200 ° C, the consumption of souls would definitely be more than this.
In addition, it was not that Roy did not want to lower the temperature further, but he found that after reaching -200 ° C, if the temperature continued to drop, the consumption of souls would begin to increase dramatically. Roy experimented. In order to create a temperature of -201 ° C, the number of souls needed had increased to ten thousand, and in order to create a temperature of -202 ° C, the consumption of souls had reached eighteen thousand. The higher it went, the more souls it would cost. Every additional scale required about two thousand more souls than the previous level.
Roy was not good at math, so he could not calculate how many souls he needed to reach absolute zero. But in any case, the enormous consumption of souls made him flinch. In the end, he chose the most cost-effective scale of -200 ° C.
Although not being able to reach absolute zero made the obsessive-compulsive patients very unhappy, the effect of a temperature of -200 ° C was astonishing …
Because at this temperature, the oxygen and nitrogen in the air directly liquefied!
The small colorless water droplets that Ulthane saw just now were the scene of oxygen and nitrogen being liquefied. This was the reason why he found it difficult to breathe. Fortunately, the two of them were not fighting in a sealed space. Otherwise, even if Ulthane did not freeze, he would quickly suffocate to death!
As soon as oxygen and nitrogen were liquefied, their volume naturally decreased, and the nearby gas would fill in. This was the reason why there was airflow in the subway tunnel. As the airflow filled in, more oxygen and nitrogen liquefied again and finally dripped down as raindrops.
These liquid nitrogen and liquid oxygen were extremely terrifying, but when they dripped down and came into contact with objects with higher temperatures, they would immediately overcool and boil. If there was enough condensed liquid nitrogen and liquid oxygen, one could even see the scene of boiling water. During this process, the heat conduction process of the object would be accelerated to a very short period of time!
In particular, Roy and Ulthane were fighting in a relatively narrow space, which allowed him to exert his frost power to the extreme.
In the past, when the temperature of Roy's frost power was not too low, even if he wanted to freeze the target, this process would take at least three seconds. But now that it had reached -200 ° C, the freezing time was reduced to about two seconds.
Don't underestimate this gap of just one second. In fact, one second could almost determine whether the target could react and mobilize magic power to defend! The difference between the two was huge.
Without even giving him time to react, attacking meant that it was over …
Select text and click 'Report' to let us know about any bad translation.
