What did she need to do to stop a battleship that was about to explode?
Looking at the frozen control panel, Lin was thinking about this problem.
Because it was frozen, it could not be operated at the moment, and when the solidification disappeared, it might immediately explode.
This caused a certain degree of difficulty … So Lin thought of a plan. First, restore its power system, then drive the battleship far away.
At least it would not affect the area near the school, so there was no problem.
Then, she would try to restore the solidification … Although Lin had not done this before, she felt that she could use the watch to guide the transfer organs and put the battleship in a state of defensive solidification.
Originally, the inanimate objects here would not be solidified, but this battleship was solidified.
It was very likely that it was solidified by the Evaporator before coming in, and now it was slowly being unsolidified.
So, part of the battleship was not solidified, and part of it was solidified. Lin decided to try to use the watch … to speed up the process.
Thinking about this, the spy left the cockpit and went to … where the engine was.
In the process of moving forward, the spy slowly changed her body from the original fairy disguise to … Veronica.
After changing, the spy went to the engine room.
The entrance to the engine room was blocked by a thick metal door, so the spy did not need to go in. She only needed to check outside to see if the whole engine inside was solidified …
… It seemed that it was not. The engine was not in a solidified state, but it stopped operating because it did not receive any instructions, so it entered a safe state.
In that case, the spy returned to the cockpit and found an operating system. This operating system only controlled the movement of the battleship, not the explosion of the battleship.
Then, the spy stuck the watch on the fixed screen.
This operating system was very much like … a computer. It did not have a separate three-dimensional screen, and its operation screen was displayed on a flat screen.
When the spy stuck the watch on the screen, she activated a … life search function inside the watch.
This function was used to find whether there was life in the surroundings, but it could also be used to guide the transfer organs … It seemed to be effective.
Seeing that the image displayed on the operation screen was restored, the spy immediately tried to operate it.
"Restoring operation state … initializing … engine … starting …"
After the system muttered a bunch of words to itself, the spy could feel the entire battleship slowly shaking.
It seemed that no part of the engine was solidified, but … the 'warp movement' function of the engine seemed to be unusable.
Although there was no need to use it.
Then, the spy turned on the engine at full power. The battleship lying on the ground slowly adjusted itself into the correct posture and flew into the sky.
What was the explosion radius of the Annihilation Ship? There was no accurate value.
However, it would definitely be far stronger than any weapon Ershi had ever used, so Lin decided to take it into the void.
If there was a void here.
The battleship flew upward at an extremely fast speed. Through the control panel, they could see that everything below was getting smaller and smaller, and the surrounding fog was getting denser and denser.
As the warship rose higher, its speed … began to slow down.
It felt like … he had sunk into mud, but in reality, he hadn't sunk into anything, and the operation panel showed that everything was fine.
However, the speed of the battleship became slower and slower.
A wonderful scene appeared in the surroundings … There were many floating, bubble-like things appearing in the scene.
It turned out that flying at such a high altitude allowed one to see such a scenery …
They were now more than 30,000 meters above the ground. From this height, they could only see a red mist. However, if they looked around, they could see many things between 30 to 100 meters in diameter, which looked like bubbles.
Additionally, they could also see some … scenery within these bubbles.
To put it simply, they looked like round … screens. Various images were being played on them.
This reminded Lin of the advertisements that could be seen everywhere in the city. However, these bubbles were not displaying advertisements, but various … scenery.
Some appeared to be forests, some appeared to be mountains, and some appeared to be other environments. It appeared that the world within these bubbles was very rich.
Thus, the spy wanted to go out and take a look. As for the battleship, he adjusted it to fly out at its highest speed.
In the end, the spy had to go out halfway. He couldn't just fly on the battleship and blow it up together with it.
Even so, the spy still flew on the battleship for a while.
After flying to an altitude of 110,000 meters, the spy found that the surrounding environment was still filled with various bubbles …
If they were on Ershi, this altitude would already be considered as entering the void. However, there was no void at all here.
Additionally, according to the system's analysis, the surrounding air was still in a very normal state. It did not become thinner with the altitude.
This was an interesting phenomenon. Since that was the case, he decided to leave the battleship.
However, there was still a need to continue observing the situation within the battleship. Thus, the spy built a mobile surveillance camera here.
The raw material came from a machine pilot here.
After that, the spy walked to a special place … where the escape pod was.
Why would this suicidal battleship have an escape pod? The exact reason was not clear.
However, it seemed that Ershi had a rule that every battleship must be equipped with an escape pod. Thus, the spy easily left the rapidly flying battleship.
Although its speed had slowed down, it was actually quite fast. The current speed of the battleship was about 1,000 meters per second.
From the ejected escape pod, the spy could clearly see this behemoth rising into the sky. It would be great if it could rise to a high enough altitude.
In that case, let's go explore these bubbles first.
With that in mind, the spy operated the escape pod and began to approach the nearest bubble. This bubble had a diameter of more than 30 meters, and it seemed to contain a lot of … water.
The moment the escape pod touched this bubble, the bubble suddenly exploded with a 'pop'.
At the same time, a large amount of … water burst out from inside, sprinkling down.
This was quite interesting … From the outside, the water in the bubble looked more like an image than a real object. However, after it was knocked open, a real object came out from inside.
You've already exceeded your reading limit for today. If you want to read more, please log in.
Login
Select text and click 'Report' to let us know about any bad translation.
