Although the wide-angle lens was an accessory developed for digital cameras, the various data parameters were very suitable for the use of drones.
Coupled with the application of the "wide-angle" technology, it could guide the drone's flight with a wider field of view. In a single-view image, it was easier to determine the obstacles around the drone's flight path or the targets worth paying attention to.
When Huang An contacted the manufacturer, they had already accepted a custom order from the military small drone research and development team. Soon, after obtaining the approval of the customization unit, Qu Sen's team received the relevant parameters.
Not only did the custom-made lens provide several shape models, but the lens material, photosensitive elements, and pixels were also upgraded from the ordinary version.
Because the two research and development teams noticed that the lenses produced by the manufacturer were all intended for small drones, the shape parameters of several custom-made models did not need to be modified at all. What the working group had to do was to increase the number of custom-made lenses on the basis of the manufacturer's existing orders.
The lens manufacturer immediately received custom-made products from both the military and the police. Although the number added together was not much, the importance of this business was very high. Whether it was the product quality or the production time, they had basically reached the limit of their current ability.
Although Sister Liu was responsible for the design of the casing, she had participated in the design of medium and large drones before. After staying in the group for a long time and getting familiar with everyone, she would directly speak up when she had ideas in the design of drones.
Her ideas were mainly aimed at the technical reconnaissance drones and the research and development difficulties they were now encountering.
In the past, when she was designing for medium and large drones, she often encountered good ideas in the design, but they were forced by the technology to be realized.
Some of these technologies that could not be realized were because the design team did not have enough knowledge. Some were completely because the current branch field did not have the technology to support the realization of the ideas at all.
In other words, the design ideas were ahead of the current technology.
Big Sister Liu advised everyone that they should never think of making their designs perfect in one go and perfect in all aspects. After all, the level of technology in today's various fields, especially the various technologies in the electronics industry, was absolutely changing with each passing day.
It was an exaggeration to say that this month, the designer was still in a terrible fix because one of his design ideas could not be realized. The relevant technology might come out next month.
Therefore, as a design team, all they could do was to develop as practical a model as possible within the scope of the existing technology. After the related technology was updated, the design would be upgraded.
After the new technology had accumulated to a certain extent, the next generation of products would be launched.
Just like mobile phones, computers, and other electronic products, all aspects of performance and integrated functions were evolved generation by generation.
Big Sister Liu's words made the drone team decisively give up the idea of designing the technical reconnaissance drone in one step.
After adjusting his train of thought, he thought of ways to improve the material of the existing components of the technical reconnaissance drone. For example, replacing the motor and battery casing with lighter materials to reduce the overall weight of the drone. Like the general reconnaissance drone, it was designed with two cameras.
This method was used to make up for the problem of changing the surveillance perspective when the drone changed from a reconnaissance state to a fast movement state.
On the other hand, they also gave up on the idea of putting in video surveillance equipment. They changed the existing design that could put five small relay antennas to the same shape parameters as the relay antennas and the small monitoring equipment. According to the needs of the mission, it can be flexibly carried with it.
After sorting out the design ideas, Qu Sen wrote down the text and handed it to Huang An. Then, it passed the design evaluation smoothly.
Qu Sen's idea was very much in line with the working group. After all, the country was not rich enough to distribute multiple models of drones to the first-tier technical units.
If the first generation of the product only had two general models and one external model for technical detection, it would be the most economical plan to gradually improve the functions according to the advancement of technology in the future.
Reducing the overall quality of the drone belonged to the field of material science. This task was handed over to the manufacturer of the component. The design of the casing was Sister Liu's. If anyone had good suggestions or ideas, they could put forward them, but she was the main designer.
The development of the monitoring equipment with suitable shape parameters was the work of the monitoring equipment research and development team.
The calculation of the balance of the new body could not be started immediately because it involved the reduction of the weight of the various parts of the drone. The control system of the dual lens could be borrowed from the general reconnaissance drone.
The new USB external control platform and the multi-functional cooling bracket for the laptop with a backup battery pack were also completed and handed over to the respective manufacturers for trial production.
After all the work was either handed over or put on hold, Qu Sen's main task was only to teach.
When he had free time, he had extra energy to pay attention to the progress of the "Double Yellow" case.
Although investigating and solving the case had nothing to do with him as the team leader of the drone design team. However, the "Double Yellow" gang still aroused the interest of the inexperienced Qu Sen.
When Qu Sen planned to inquire about the progress of the case from Deputy Director Xiao of the Railway Station Branch, the Railway Station Branch first found the working group through the Municipal Bureau.
This was because they were about to arrest the members of the "Double Yellow" gang. Since the last time they tasted the convenience and efficiency of the drone, this time they did not even think about it and asked for help again.
It just so happened that the design of the general reconnaissance drone was relatively complete. In order to further test the stability of the experimental model, the working group purchased another batch of components. After receiving the request, they immediately agreed to dispatch five general reconnaissance drones this time to cooperate with the arrest operation.
Sister Liu's preliminary design plan was almost done. After the team members got together and made some small modifications, they sent it to the Technical Division of the Provincial Department for printing.
Because the arrest was still carried out at night, after printing it, it was still sprayed with black paint.
In addition, considering that it might be used during the day, the working group simply waved the pen and asked the team to print a set of cases and spray them with blue and white paint suitable for daytime covert investigation.
This time, not only did the two branches participate in the arrest, but the Huacheng Municipal Bureau Criminal Police also joined in. A total of more than forty gang members were to be arrested, but the "Double Yellow" brothers were not on the list.
After a period of field investigation, they discovered that the Yang Yongfu Used Car Shop was simply a large-scale stolen goods transfer station that collected and sold stolen goods.
After the target was locked, the information of the relevant people involved in the case was quickly collected.
The main culprit, Yang Yongfu, was the middle-aged man called "uncle" by the Huang brothers. When he was young, he was just a car mechanic. When he was in his thirties, he set up his own repair stall. Then, the scale became bigger and bigger, and finally, it became a very famous repair shop in the area.
After a few years in the repair shop, as the used car trade became more and more popular, Yang Yongfu found that selling used cars was more profitable than repairing cars. So, Old Yang's repair shop changed and became the Yang Yongfu Used Car Shop.
The young man named "Get Rich" was named Yang Yuhang, Yang Yongfu's nephew. Like Qu Sen, he majored in computer science, but he had a real bachelor's degree.
After Yang Yuhang graduated from university, he rented a stall in the computer city to sell assembled computers. Because he just graduated, he didn't have enough social experience. He only knew how to attract customers at a low price, which angered the public. Soon, his stall was destroyed by the cooperation of his peers.
After his business failed, Yang Yuhang helped out in Yang Yongfu's repair shop until now.
After a period of investigation, the field investigation found that the uncle and nephew not only received stolen goods from the "Shuang Huang" gang, but also maintained close contact with several thief gangs in Huacheng, such as the "Biker Gang" and the "Car Smashing Gang."
After buying the stolen goods, they used the name of sending used cars from other places to send the stolen goods to the northeast. After the stolen goods were sent, they would buy the stolen goods from their "peers" and transport them back to the local area. They would then sell them to a few dealers in Huacheng who resell second-hand electronic products.
After the dealers received the stolen goods, they had to do some processing. By changing the appearance and using the serial number of the same model, the stolen goods would be "transformed." Then, they would be distributed to various second-hand product counters to be sold publicly.
At this point, the police finally understood why the stolen goods handled by the "Shuang Huang" gang never appeared in the local market.
This was because the entire criminal network involved many links. Especially when it involved other criminal networks in other provinces and cities. It would take a long time to figure it out.
Now, if one of the points was touched, the other nodes on the entire network would be frightened. Therefore, the police were not ready to make a move immediately. They planned to dig deeper and gather enough information before pulling in the net.
After some research, the Huacheng City Bureau decided that even though the Huang brothers were the main culprits, in order to not alarm Yang Yongfu and his nephew, they would first take out the members of the "Shuang Huang" gang so that they could not continue to do evil.
After that, they would keep an eye on the two main culprits until the entire criminal network was figured out. Then, they would gather and arrest them.
The Huang brothers' anti-reconnaissance awareness was very strong. After a period of investigation, they found that they used multiple phones to contact their subordinates and changed their numbers frequently.
But now, from their car to their hiding place, there were listening devices installed everywhere. The research and development team's "latest product" was also installed. The police also had the cooperation of two major wireless communication service providers.
It only took a little more than a week to completely grasp the list of the gang's members through the communication between them.
In addition to the cooperation of the various grassroots police stations, the entire gang, including the two main culprits, 17 core members, and 29 peripheral members, were all in the police's sights.
After a period of observation, they found that these members' work and rest schedules were very irregular and their living areas were very scattered. If they wanted to arrest them all, it would take a lot of police force.
But the police were also "bad" enough. They quickly came up with a way to save the trouble.
Through the contact information of the "Huang Shuang" gang, they used the voice changer software to simulate the voice of Huang Ansheng, who had a more cosmopolitan personality. Then, they used the phone number copied by the communication company to invite the gang members for a "gathering".
The purpose of the gathering was that "Huang Ansheng" wanted to straighten out the scope of everyone's "work". The time was set at 11 o 'clock at night because it was the prime time for everyone to "work".
The location was a small restaurant that had just opened for business a few days ago. On the day of the gathering in this restaurant, from the boss to the waiters, all of them were "guesting" by the police.
Select text and click 'Report' to let us know about any bad translation.
